This page will list OBD interfaces that were tested with V-Tool. We strongly recommend to use vLinker MC+ or OBDLink MX+ interfaces. However, other interfaces, even if not listed below, can work flawlessly with V-Tool. To have full support on P1/P2/P3 platforms it is important that interface supports MS CAN communication. It is usually called as “ForScan compatibility” in adapter specification. The other important parameter is internal memory size, but unfortunately, manufacturers do not provide this information and the only way to check it is to to test it.
For now only Bluetooth devices are supported by V-Tool. Support for WiFi OBD devices will be added in the future.
General recommendations:
- If you have P1/P2/P3 platform Volvo (these are all Volvos before SPA/CMA era) then select OBD adapter that support Medium-Speed CAN (MS-CAN). This is a MUST for you if you want to have full functionality!
- SPA/CMA cars don’t need MS-CAN support
- Cheaper iCar/Vgate adapters will work in read-only mode with all SPA/CMA cars, model year 2025 and newer (this includes cars produced in the second half of 2024). It means that you will be able to read live data or DTCs, but will not be able to clear DTCs or run any adaptations. This is caused by some changes in communication algorithm and some technical limitations of these adapters. We are working to solve this issue.
- If you have iPhone, then you need Bluetooth 4.0 (also called BLE) version. Usually these adapters are marked as “+” version. Exceptions are OBDLink MX+, vLinker MS, vLinker FS. All these 3 devices are Apple MFi certified devices and also will work with V-Tool OBD Scanner, even though they are not using BLE.
- Android phones will work with Bluetooth 3.0 (also called classic) version.
Tested and recommended OBD adapters
vLinker MC+
- Recommended!
Platforms:
- P1, P2, P3, SPA/CMA
Where to buy: Amazon, eBay, Aliexpress, Allegro
Note: iOS is supported only by “+” (plus) version
OBDLink MX+
- Recommended! Absolute top performance!
Platforms:
- P1, P2, P3, SPA/CMA
Where to buy: Amazon, eBay, Aliexpress, Allegro
vLinker FD+
- Recommended! Best value to price ratio.
Platforms:
- P1, P2, P3, SPA/CMA
Where to buy: Amazon, eBay, Aliexpress, Allegro
Note: iOS is supported only by “+” (plus) version
vLinker FS
- Highly recommended!
Platforms:
- P1, P2, P3, SPA/CMA
Where to buy: Amazon, eBay, Aliexpress, Allegro
Note: if you experiencing connection problem after first connection, try to reflesh vLinkerFS firmware.
vLinker MS
- Highly recommended!
Platforms:
- P1, P2, P3, SPA/CMA
Where to buy: Amazon, eBay, Aliexpress, Allegro
Absolute premium quality. Highly recommended!
iCar Pro
Platforms:
- SPA/CMA full support up to MY 2024
- SPA/CMA read-only on MY 2025+
- P1, P2, P3 (only HS CAN modules)
Where to buy: Amazon, eBay, Aliexpress, Allegro
Note 1: iOS is only supported by BLE version. Make sure you buy correct version.
Note 2: if you don’t need support for P1/P2/P3 cars this interface can be used with SPA/CMA cars.
Note 3: Read-only on most MY2025+ cars (cannot clear DTCs, etc).
OBDLink LX
iCar Pro 2S
Platforms:
- SPA/CMA full support up to MY 2024
- SPA/CMA read-only on MY 2025+
- P1, P2, P3 (only HS CAN modules)
Where to buy: Amazon, eBay, Aliexpress, Allegro
Note 1: if you don’t need support for P1/P2/P3 cars this interface can be used with SPA/CMA cars.
Note 2: Read-only on most MY2025+ cars (cannot clear DTCs, etc).
Vgate iCar2
Platforms:
- SPA/CMA full support up to MY 2024
- SPA/CMA read-only on MY 2025+
- P1, P2, P3 (only HS CAN modules)
Where to buy: Amazon, eBay, Aliexpress, Allegro
Note 1: iOS is only supported by BLE version. Make sure you buy correct version.
Note 2: if you don’t need support for P1/P2/P3 cars this interface is a real bargain and can be used with SPA/CMA cars produced before MY 2025.
Note 3: Read-only on most MY2025+ cars (cannot clear DTCs, etc).
Tested and NOT recommended OBD adapters
NEXAS NexLink
Platforms:
- SPA/CMA (do not connect)
- P1, P2, P3 (only HS CAN modules)
NEXAS NexLink does not support MS-CAN and internal memory size is too small to support SPA models.
Veepeak OBDCheck BLE+
Platforms:
- SPA/CMA (do not connect)
- P1, P2, P3 (only HS CAN modules)
Even though VEEPEAK adapters has premium quality design and are nicely packed, their internal memory size is too small to work correctly with V-Tool. Also, it does not support MS-CAN.